menù

Tubi di prova

AcquaNo
GasNo
voci per pagina
1 - 20 / 29
Standpipe hydrant foot DN 80, stainles
Standpipe hydrant foot DN 80, stainlesStandpipe hydrant foot DN 80, stainless for pressure tests with testhead int. thread G 2 1/2"
Gas standpipe without blow-off pipe
Gas standpipe without blow-off pipe- connection for test head HEINZ 2 1/2" ext. thread with ball valve - separate coupling connection possibility - connection for grounding cable
Flame arrester DN 50 for gas standpipe
Flame arrester DN 50 for gas standpipe- for gas test standpipe - safe device to prevent flame breakthrough into gas pipeline or gas tank - IBExU 09 ATEX 2019 X, explosion group EEx IIG IIA (for example methane or propane) according to DIN EN ISO 16852 - brass-made adapter with 2 1/2 internal thread/ext. thread (with sealings) for direct connection to the gas test standpipe
Standpipe hydrant foot 2", stainless
Standpipe hydrant foot 2", stainlessStandpipe hydrant foot 2", stainless for pressure tests with testhead
Tripod for gas standpipe
Tripod for gas standpipe- with 3 hooks and 2 fixing clips to fasten the gas stand pipe
Venturi nozzle for gas standpipe
Venturi nozzle for gas standpipe- with 2 1/2 internal thread/ext. thread for connection to the gas standpipe - compressed air claw coupling for the compressed air supply
Ignition module for gas standpipe
Ignition module for gas standpipeIgnition module for gas standpipe - accessory not included
Diffuser/Muffler V2 2"
Diffuser/Muffler V2 2"The diffuser for the blow-off/measuring pipe v 2" provides outstanding noise reduction. It was optimized for operation at extremely high temperatures. It can be installed onto the blow-off pipe's 2" thread.
Diffuser for gas standpipe
Diffuser for gas standpipe- stainless steel diffuser, ø 160 mm - 1 ext. thread for connection to the gas standpipe
Standpipe, DN 50, 1x Storz C system separator
Standpipe, DN 50, 1x Storz C system separatorStandpipe, DN 50, 1x Storz C system separator with shut-off valve Standpipe DN 80 VA/MS 1x C Ms System separator suitable for drinking water
Guy rope set for gas standpipe/mobile flare XL
Guy rope set for gas standpipe/mobile flare XL3x hook incl. rope and tension clamps
Standpipe flange DN 50, stainless
Standpipe flange DN 50, stainlessStandpipe flange DN 50, stainless for pressure tests with testhead int. thread G 2 1/2" - Separate feed via Storz C for filling with shut-off via ball valve - sampling valve - a 50cm long standpipe extension with standpipe foot DN 50 (System Baden-Württemberg) can be screwed on.
Muffler for gas standpipe
Muffler for gas standpipeMuffler for gas standpipe - with 1" ext. thread for screwing into the diffuser - maximum allowable device temperatur is 600°C
Blow-off pipe 1" for gas standpipe
Blow-off pipe 1" for gas standpipeBlow-off pipe 1" for gas standpipe incl. holder ignition module for blow-off pipe 1" The blow-off pipe1" can be placed into the Gas standpipe for the transport.
Gas venting pipe light PL
Gas venting pipe light PLGas venting pipe Aluminium pipe system, extension connected with Kamlok coupling, earth rod, gas measurement quick connector, Kamlok connection for hose, including Kamlok connection with 3/4" thread for use on pipe.
Standpipe DN 80, 1x Storz C , drinking water
Standpipe DN 80, 1x Storz C , drinking waterwith shut-off valve Standpipe DN 80 VA/MS 1xC Ms suitable for drinking water
Blow-off pipe 2" for gas standpipe
Blow-off pipe 2" for gas standpipeBlow-off pipe 2" for gas standpipe incl. holder ignition module for blow-off pipe 2" Total length: 1 m
Blow-off/measuring pipe v 2"
Blow-off/measuring pipe v 2"Blow-off/measuring pipe v 2" incl. holder ignition module for blow-off pipe 2" and two plugs Blow-off pipe with integrated pitot tube for flow speed measurement and monitoring in combination with GOLIATH. Connection to GOLIATH for speed and gas concentration measurements is realised by a hose-connecting set (separately available). The outlet end of the blow-off pipe has a 2" external thread on which the diffuser/muffler can be screwed down. Length: 1 m
Standpipe extension blow-off/measuring pipe v 2", 0.5 metres
Standpipe extension blow-off/measuring pipe v 2", 0.5 metresStandpipe extension with integrated pitot tube for measuring and monitoring the flow velocity in connection with GOLIATH. Connection of GOLIATH via hose connection set for measuring the velocity and gas concentration. The standpipe extension is equipped with an adapter 2 1/2" internal thread at the outlet so that a blow-off pipe 2" can be mounted. A 1" blow-off pipe can also be mounted using a suitable reducer.
Flame arrester DN 50 hydrogen for gas stand pipe
Flame arrester DN 50 hydrogen
for gas stand pipe- safe component against flame flashback into the pipe or tank - IBExU 11 ATEX 2056 X, explosion group IIC, according to DIN EN ISO 16852 - connection via tank truck system, tank truck coupling male part on both sides Please follow the instructions in the separately enclosed operating manual!
voci per pagina
1 - 20 / 29
keyboard_arrow_up